Set Up Override Schedules for Your Displays

You can schedule your displays to show specific content temporarily—like a message or alert—by using an Override Schedule. This lets you temporarily replace or add content to your Display’s regular schedule and show important messages at defined times. 

Instructions

1. Log in at risevision.com and click Schedules.
2. Click Add Schedule.
3. Click the Timeline toggle and configure the start and end time for the override schedule
4. Click the Distribution toggle and configure which Displays the override schedule will show on.
5. Click the Override dropdown and select a mode:
   1. Replace: Replaces your Displays default content during a set time range
   2. Include: Adds content to the Displays default content during a set time range
6. Click Add playlist item to add the Presentations you want to show.
7. Click Save when finished.

Here is a quick video example going through the setup: 

Behavior Notes

If two schedules with the Override - Replace setting toggled on are assigned to the same display: 

• If the timelines of the schedules overlap, the most recently triggered schedule's content will be seen.
  • Ex 1: if Schedule A is set to appear from 1-4pm and Schedule B is set to appear from 2-4pm, at 3pm only Schedule B’s content will be seen.
  • Ex 2: if Schedule A is set to run All Day and Schedule B is set to appear from 2-4pm, at 3pm only Schedule B’s content will be seen.
• If the timelines of the schedules have the same start time, both schedules will be shown.

The time that a schedule was chronologically saved has no bearing on whether it shows or not on a display.

Have a suggestion or feature request?